View PMEG1030EH_198523.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

PMEG1030EH; PMEG1030EJ
10 V, 3 A ultra low VF MEGA Schottky barrier rectifiers
Rev. 03 -- 2 June 2005
www..com
Product data sheet
1. Product profile
1.1 General description
Planar Maximum Efficiency General Application (MEGA) Schottky barrier rectifiers with an integrated guard ring for stress protection encapsulated in small SMD plastic packages.
Table 1: Product overview Package Philips PMEG1030EH PMEG1030EJ SOD123F SOD323F JEITA SC-90 single isolated diodes single isolated diodes Configuration
Type number
1.2 Features
s s s s Forward current: 3 A Reverse voltage: 10 V Ultra low forward voltage Small and flat lead SMD package
1.3 Applications
s s s s s Low voltage rectification High efficiency DC-to-DC conversion Switched-mode power supply Inverse polarity protection Low power consumption applications
1.4 Quick reference data
Table 2: Symbol IF VR VF
[1]
Quick reference data Parameter forward current reverse voltage forward voltage IF = 3 A
[1]
Conditions Tsp 55 C
Min -
Typ 390
Max 3 10 530
Unit A V mV
Pulse test: tp 300 s; 0.02.
Philips Semiconductors
PMEG1030EH; PMEG1030EJ
www..com
10 V, 3 A ultra low VF MEGA Schottky barrier rectifiers
2. Pinning information
Table 3: Pin 1 2 Pinning Description cathode anode
[1]
Simplified outline
Symbol
1 2
sym001
1
001aab540
2
[1]
The marking bar indicates the cathode.
3. Ordering information
Table 4: Ordering information Package Name PMEG1030EH PMEG1030EJ SC-90 Description plastic surface mounted package; 2 leads plastic surface mounted package; 2 leads Version SOD123F SOD323F Type number
4. Marking
Table 5: Marking codes Marking code AC E7 Type number PMEG1030EH PMEG1030EJ
9397 750 15078
(c) Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet
Rev. 03 -- 2 June 2005
2 of 9
Philips Semiconductors
PMEG1030EH; PMEG1030EJ
www..com
10 V, 3 A ultra low VF MEGA Schottky barrier rectifiers
5. Limiting values
Table 6: Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol Parameter VR IF IFRM IFSM Ptot reverse voltage forward current repetitive peak forward current non-repetitive peak forward current total power dissipation PMEG1030EH PMEG1030EJ Tj Tamb Tstg
[1] [2]
Conditions Tsp 55 C tp 1 ms; 0.25 t = 8 ms; square wave Tamb 25 C
[1] [2] [1] [2] [1]
Min -
Max 10 3 5.5 9
Unit V A A A
-65 -65
375 830 360 830 150 +150 +150
mW mW mW mW C C C
junction temperature ambient temperature storage temperature
Device mounted on an FR4 Printed-Circuit Board (PCB), single-sided copper, tin-plated and standard footprint. Device mounted on an FR4 PCB, single-sided copper, tin-plated, mounting pad for cathode 1 cm2.
6. Thermal characteristics
Table 7: Symbol Rth(j-a) Thermal characteristics Parameter thermal resistance from junction to ambient PMEG1030EH PMEG1030EJ Rth(j-sp) thermal resistance from junction to solder point PMEG1030EH PMEG1030EJ
[1] [2]
Conditions in free air
[1] [2] [2] [3] [1] [2] [2] [3]
Min
Typ
Max
Unit
-
-
330 150 350 150
K/W K/W K/W K/W
-
-
60 55
K/W K/W
Device mounted on an FR4 PCB, single-sided copper, tin-plated and standard footprint. For Schottky barrier diodes thermal run-away has to be considered, as in some applications the reverse power losses PR are a significant part of the total power losses. Nomograms for determining the reverse power losses PR and IF(AV) rating will be available on request. Device mounted on an FR4 PCB, single-sided copper, tin-plated, mounting pad for cathode 1 cm2.
[3]
9397 750 15078
(c) Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet
Rev. 03 -- 2 June 2005
3 of 9
Philips Semiconductors
PMEG1030EH; PMEG1030EJ
www..com
10 V, 3 A ultra low VF MEGA Schottky barrier rectifiers
7. Characteristics
Table 8: Characteristics Tamb = 25 C unless otherwise specified. Symbol VF Parameter forward voltage IF = 0.01 A IF = 0.1 A IF = 1 A IF = 3 A IR reverse current VR = 5 V VR = 8 V VR = 10 V Cd
[1]
Conditions
[1]
Min -
Typ 100 170 280 390 0.55 0.8 1 70
Max 130 200 350 530 2 2.5 3 85
Unit mV mV mV mV mA mA mA pF
diode capacitance
Pulse test: tp 300 s; 0.02.
VR = 1 V; f = 1 MHz
104 IF (mA) 103
006aaa290
106 IR (A) 105
006aaa291
(1)
(2)
102
(1)
(2)
(3)
(4)
104
103 10 102 1
(3)
10
(4)
10-1 0 0.1 0.2 0.3 0.4 0.5 VF (V)
1 0 2 4 6 8 VR (V) 10
(1) Tamb = 125 C (2) Tamb = 85 C (3) Tamb = 25 C (4) Tamb = -40 C
(1) Tamb = 125 C (2) Tamb = 85 C (3) Tamb = 25 C (4) Tamb = -40 C
Fig 1. Forward current as a function of forward voltage; typical values
Fig 2. Reverse current as a function of reverse voltage; typical values
9397 750 15078
(c) Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet
Rev. 03 -- 2 June 2005
4 of 9
Philips Semiconductors
PMEG1030EH; PMEG1030EJ
www..com
10 V, 3 A ultra low VF MEGA Schottky barrier rectifiers
130 Cd (pF) 110
006aaa292
90
70
50
30 0 2 4 6 8 VR (V) 10
Tamb = 25 C; f = 1 MHz
Fig 3. Diode capacitance as a function of reverse voltage; typical values
8. Package outline
1.7 1.5 1 0.55 0.35 3.6 3.4 2.7 2.5 2.7 2.3 1.8 1.6 1.2 1.0 1.35 1.15 1 0.5 0.3 0.80 0.65
2 0.70 0.55 Dimensions in mm 0.25 0.10 04-11-29 Dimensions in mm
2 0.40 0.25 0.25 0.10 04-09-13
Fig 4. Package outline SOD123F
Fig 5. Package outline SOD323F (SC-90)
9. Packing information
Table 9: Packing methods The -xxx numbers are the last three digits of the 12NC ordering code. [1] Type number PMEG1030EH PMEG1030EJ
[1]
Package SOD123F SOD323F
Description 4 mm pitch, 8 mm tape and reel 4 mm pitch, 8 mm tape and reel
Packing quantity 3000 -115 -115 10000 -135 -135
For further information and the availability of packing methods, see Section 16.
(c) Koninklijke Philips Electronics N.V. 2005. All rights reserved.
9397 750 15078
Product data sheet
Rev. 03 -- 2 June 2005
5 of 9
Philips Semiconductors
PMEG1030EH; PMEG1030EJ
www..com
10 V, 3 A ultra low VF MEGA Schottky barrier rectifiers
10. Soldering
4.4 4 2.9 1.6 solder lands solder resist 2.1 1.6 1.1 1.2 solder paste occupied area 1.1 (2x)
Reflow soldering is the only recommended soldering method. Dimensions in mm
Fig 6. Reflow soldering footprint SOD123F
3.05 2.80 2.10 1.60
solder lands solder resist
1.65
0.95
0.50
0.60 occupied area solder paste
0.50 (2x)
msa433
Reflow soldering is the only recommended soldering method. Dimensions in mm
Fig 7. Reflow soldering footprint SOD323F (SC-90)
9397 750 15078
(c) Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet
Rev. 03 -- 2 June 2005
6 of 9
Philips Semiconductors
PMEG1030EH; PMEG1030EJ
www..com
10 V, 3 A ultra low VF MEGA Schottky barrier rectifiers
11. Revision history
Table 10: Revision history Release date 20050602 Data sheet status Product data sheet Product data sheet Product data sheet Change notice Doc. number 9397 750 15078 9397 750 14884 9397 750 13916 Supersedes PMEG1030EH_EJ_2 PMEG1030EJ_1 Document ID PMEG1030EH_EJ_3 Modifications: PMEG1030EH_EJ_2 PMEG1030EJ_1
*
Table 6 "Limiting values" IFSM value changed to 9 A
20050405 20050124
9397 750 15078
(c) Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet
Rev. 03 -- 2 June 2005
7 of 9
Philips Semiconductors
PMEG1030EH; PMEG1030EJ
www..com
10 V, 3 A ultra low VF MEGA Schottky barrier rectifiers
12. Data sheet status
Level I II Data sheet status [1] Objective data Preliminary data Product status [2] [3] Development Qualification Definition This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN).
III
Product data
Production
[1] [2] [3]
Please consult the most recently issued data sheet before initiating or completing a design. The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status.
13. Definitions
Short-form specification -- The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition -- Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information -- Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification.
customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes -- Philips Semiconductors reserves the right to make changes in the products - including circuits, standard cells, and/or software - described or contained herein in order to improve design and/or performance. When the product is in full production (status `Production'), relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified.
15. Trademarks
Notice -- All referenced brands, product names, service names and trademarks are the property of their respective owners.
14. Disclaimers
Life support -- These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors
16. Contact information
For additional information, please visit: http://www.semiconductors.philips.com For sales office addresses, send an email to: sales.addresses@www.semiconductors.philips.com
9397 750 15078
(c) Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet
Rev. 03 -- 2 June 2005
8 of 9
Philips Semiconductors
PMEG1030EH; PMEG1030EJ
www..com
10 V, 3 A ultra low VF MEGA Schottky barrier rectifiers
17. Contents
1 1.1 1.2 1.3 1.4 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . General description. . . . . . . . . . . . . . . . . . . . . . Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . Quick reference data. . . . . . . . . . . . . . . . . . . . . Pinning information . . . . . . . . . . . . . . . . . . . . . . Ordering information . . . . . . . . . . . . . . . . . . . . . Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . Thermal characteristics. . . . . . . . . . . . . . . . . . . Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . Package outline . . . . . . . . . . . . . . . . . . . . . . . . . Packing information. . . . . . . . . . . . . . . . . . . . . . Soldering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Revision history . . . . . . . . . . . . . . . . . . . . . . . . . Data sheet status . . . . . . . . . . . . . . . . . . . . . . . . Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Contact information . . . . . . . . . . . . . . . . . . . . . 1 1 1 1 1 2 2 2 3 3 4 5 5 6 7 8 8 8 8 8
(c) Koninklijke Philips Electronics N.V. 2005
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Date of release: 2 June 2005 Document number: 9397 750 15078
Published in The Netherlands

▲Up To Search▲

Price & Availability of PMEG1030EH

	To Download PMEG1030EH Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .